How to replace a damaged floor panel? .rmvb

This video will tell you how to change a damaged floor panel.
With Tap&Go Locking system, it's very simple and quick for Bergeim Floors!
The damaged panel can be replaced without breaking the others, which makes the flooring as good as before.
158 комментариев
CANCEL ALL THUMBS DOWN...You saved me 571.86!
Excellent squat form bro
Holy crap! Every company I have contacted wants to come and rip up half my flooring to fix one freaking panel. Thank you so much for sharing!
Great video! Followed the advice and replaced 4 boards in the middle of the room with no issues. :)
LA Cerrito
omg,thank you.  You saved me a ton of unnecessary grief
Mary Kay Thompson
What an amazing video.  I've seen dozens of these, and this one is by far the best.
Mattila the Hun
good video, bad music
Next episode, how to fix your underfloor heating!
Jokes aside good video, thanks.
Addy B.
great video. many thanks! :)
Timothy Ulrey
That is a life saver.  After watching 20 + videos, this blows away the others.  THANKS! 
Now I know what to do when I move the fireplace starter from the floor to the side in a future project. Thank you!! :)
Lerone Q
Thanks, you helped me alot.
Diane Corwin
Great DIY video!  You rock!!!
dctrtuba brass
This is awesome.
James Graham
Very convenient you had an end board to chap away before removing and replacing. What if it was in the middle without that option??
You da man
Thao Nguyen
Very helpful thanks
Gumboot Zone
I'm 50 now, and people keep asking me if I get sore knees doing hardwood floors. I say "Never!" because I hardly ever kneel, but when I need to get close like this I do the "Asian squat" like this fella does.
Mil Rodz
by far, this is the best most instructional video we watched 7 others and none showed such perfection and ability with simple tools...we were able to successfully replaced 3 bad laminate pieces thanks to this video. Thank you for making it.
Andreka Burnett
Of all the videos I've watched, this seems the simplest! After watching this video, I'm now sure that my husband and I would be able to handle this task. We have in total maybe 4-8 boards that need to be replaced. I initially thought we would have to get the entire floor redone, but I'm confident now that we could just replace the damaged panels. Thanks so much for this video!
Vlad Koshel
Excellent to see that woodprix has new plans what helped me save some money and energy to build it.
Victor Parkhomenko
Wow. Really it is awesome. Respect.
Eddie Scoseria
how can I hire this agile Asian man to replace my plank. he did an awesome job
Jenny S
Thanks for the video. But I must know what and why are sticking to the underlayment?
Vickie Ferrano
have 1 corner of 1 board lifting.  how to fix?
Drew Limelight
can be done without a saw which creates a mess in customer's home. takes about 10 - 15 min.
Madrid Kingz
Thank you! 😊
Mary Coiffic-kamall
Does anyone know how to repair boards that did not click or become unclick. Urgent
Nice job!
Chewning Witmer
You can use woodprix instructions to build it in the cheapest way.
Appears you are cutting into the concrete....incorrect
Awesome! Now I'm going to fix my floor!
I have 2 side by side panels that are peeling upward and bubbling from water damage how realistic is it for me to do this? Would a dewalt oscillating tool work to do the cuts? Thanks for the video I hope this works for me
benoit lambert
good work
Jason A
The music inspired me to replace panels that weren't even damaged!
Would this method work using engineered wood flooring (not hardwood)? Also, because of all of my wood floor tiles being interlocked, would cutting out the 2 damaged pieces damage all of the wood floor tiles around it?

Long story short, my dad redid my floor in my room. He put sponge on top of the old floor and clicked all the pieces of new floor on the sponge. Would this method still work? Would I be able to glue the new pieces on the sponge instead of concrete? Can I hire a professional to do this for me because I'm not a handyman? I'd appreciate if you can answer my questions, thanks.
nuff said
love the vid it helped me with my problem,but ditch that music.
David Termini
Great job,Thanks for showing
Looks like he could lick his toes, if i did that position I wouldn't be able to get back up, my back would be seized
Les Aventures de Ti Ga Man
awesome!! showing this to my contractor in the morning
Sam Robinson
That music in the beginning is straight out of an instructional video tape from 1989
lee bags
Omg.... damn background music makes me crazy. No music please
isaac gomez
No knee pads lol
You are GOOD!
Morad Debbah
Chris Cork
What if you can't slide the next piece along though like he does at the end as it's in the middle of the entire floor!
brandon segura
This video was the best resource/example of how to replace a laminate panel in between already installed panels. I had a water leak in my condo (rental) and the restoration work crew that dried out the ceiling and checked for mold also remove about 12 laminate panels from below the ceiling leak. My biggest concern would be that last panel in between the already installed panel. Although the video suggest trimming off about .5mm of the up tongue I had no real way of taking that measurement. So I wasted a lot of time trimming and then trying to install. I don't know how much I took off but I'll tell you it was a lot. I pretty much made it flush with the laminate siding in order to use my mallet to hammer in place. The panel was not lose at all!! Turned out great! Have no idea how to post a picture of completed work. If any one can tell me if that's possible I'd appreciate it. Thx!
Jared Morgan favorite thing in this video is how he pulled the skill saw backward to make the initial cut....but, what if the end piece, that gets knocked back to free the end joint rabbit....what if it's pinned in by a wall?.....hmmmmm.....
Could be called " How to not use a circular saw"
Krista Edwards
What do you do if they don't sell your planks anymore the tongue and grove part is different now
maz man
Great video dude👌
Sam Dragon
Does the also work on pergo laminate panels?
Fritz the Horrible
I don't think it was smart to use the floor as your work area. You have your tools scattered and you do your sanding right on the flooring. I could see someone scratching the hell out of the flooring doing what you did.
Mary Coiffic-kamall
Very good video but can anyone help with boards that doesn't seem that the click board have become us clicked
Newer Account
You had all baseboard removed and chose the hard way! Ofcourse I do NOT know all circumstances so it would be foolish of me to judge your work but thankyou for your time, I will be sure to explain the situation in my videos and WHY I’m doing it in such a manner
Larry Burks
How can you find this guy
Jesse Anderson
How much would it cost to have something like this done?
Sherril Thibault
Great video.
Sissi Sissy
Bad Music 😡
talk to me im an educated man
Truth Seeker
Did it the hard way. Just slide off the boards then slide back in.
x fake
He makes it look so easy
Great video. Thanks
Lourdes Layton
Hello. We installed wilsonart laminate floor through out our house about 10 years ago. The floor still looks beautiful after 6 kids but there are some areas in the kitchen that have damage planks. Wilsonart has since been discontinued but we have several boxes left. After so many years would we be able to replace the damage planks only rather than redoing the whole house or would it be difficult for the planks to connect? Please advice. Thank you!
mr. JH
my asian brother from another mother.
Michael N
Use some knee pads ...
Great music, bad video
diver dave
WTF ??? he has no idea how to set the depth on the skil saw ... its best to take up some of the floor on one side of the room and replace that piece then put it back together ... Ive installed loads of this shit flooring and got calls to repair damaged flooring .
I have to confess I failed to replace a laminate panel because a) it seems sanding off 0.5mm or more on the wider edge side doesn't help as the top hard laminate layer already touching the next board already; and b) so that I failed to force the board in, and damaged the laminate upper surface edge of the floor board next to the narrow edge that was supposed to be forced in in the video.
this WON`T WORK- how did the RHS `female` lock to the tongue?? how did the forward (end panel) tongue get in? how did the rear (end panel female) engage tongue & groove? this video makes no sense
Just Dance Challenge
can this be done with laminate flooring as eel or just hard wood?
Bubba John
Glad he's not working in my house. I would insist on covering the existing flooring and he should also refrain from throwing things on to the undamaged floor. I would ask him to leave before he causes more damage!
Paul Streicher
Yes, most excellent vid of all that I have been able to find too. My problem is the laminate I need to replace is three years old and I cannot find more of it. I called Mohawk Industries and they gave me a couple of names of local businesses but how much you wanna bet they aren't going to have it in stock or be able to order it? You get different opinions from wherever you go to look for it. We started out at a large carpet and tile warehouse store. The sales person called Mohawk and came back to tell us that it was distributed at Home Depot and Lowe's. Well, we went to Lowes and they didn't have it in stock and couldn't find it on their computer. Now, on to the two businesses to call next when we called Mohawk. We have a handyman coming tomorrow to see if he can give us a quote on the repair. It will be interesting to get his take on it next. The first handyman we talked to said the only way to repair this is to replace the whole floor because when you try to pull up glued (yes, it was glued down but this isn't our place) laminate it will tear up the surrounding planks. The guy at the carpet store said it could be done. We'll see how it goes and I will try to report back. A floating floor is the way to go but just don't let any water or dog pee settle on a joint for over a minute or two or you will have swelled joints afterward.
Marcia Patrice Ganeles-Kislik
What is converse installation?
Diane Corwin
I showed this to my handyman who installed the laminate in our condo and he looked at what you've shown.  He says that it wasn't glued down, so that might be a problem down the road, as the floor can shift.  He is repairing our floor but is ripping out all the panels leading to the one that is being repaired, saying it's the best way to go.  Any thoughts?
Sherlock Jones
The nerve racking music is not appreciated as I am too old for that shit.
Bill Navarre
Why do people put that annoying ass music on their videos!!!!!?
Alberto Alonzo
Was that annoying ass music really necessary?
Whats up with the porn music
this moron is there to fix a insignificant scratch and throws his tools all over the place
Faizan Qureshi
can anybody do that in London please contact me 07957970452